基于电压陡降的VRLA容量预测新思路

重点介绍了蓄电池电压陡降与容量之间的关系及各操作因素对电压陡降的影响。由此引出一种新的蓄电池容量预测思路,并就如何实现它进行了初步探讨,最后对该思路进行了简要的展望。     

一种新型桩基动测激振设备的研制

论述桩基承载力检测的新激振设备的设计，制作和安装，根据试验和对实际工程中桩基础的应用结果，表明该激振设备工作性能良好，使用方便，测试结果可靠。     

振动沉管挤密碎石桩在闸基处理中的应用

振动沉管挤密碎石桩是近十几年来在挤密砂桩和振冲桩的基础上发展起来的地基处理新技术,具有设备简单、操作方便、成本低、施工快、无污染等特点，被工程界广泛使用，积累了一定的工程经验。其在共产主义闸地基处理中的应用即为一例。     

PTN网络的二次断纤链路规划算法

在PTN（PacketTransportNetwork）网络规划建设中,需要对光纤链路留出备份带宽,以保证部分光纤断开时,受影响业务有足够的容量进行路由重组。这也是提高网络生存性的有效方法之一。文中首先遍历网络双链路的失效状态,然后断开网络中任意两条链路,通过逐次增加链路容量来保证失效业务能够重组路由;最后提出二次断纤链路容量规划算法并进行试验仿真。结果表明,该算法在节约网络带宽、降低建造成本以及故障容错方面有着良好性能,能够很好应用于传送网络的链路规划中。     

反倾岩质边坡弯曲倾倒-剪切滑移破坏分析方法研究

目前反倾岩质边坡弯曲倾倒破坏分析方法仍以基于极限平衡理论的悬臂梁模型为主,但大多未考虑坡脚岩层的剪切破坏。为准确评价该类边坡的稳定性,建立考虑坡脚岩层剪切破坏的分析计算方法。首先,根据岩层变形破坏特征,将边坡分为后缘稳定区、中部弯曲倾倒区和前缘剪切区3个区域;其次,建立弯曲倾倒-剪切滑移破坏模式的稳定性分析方法;最后,通过工程实例验证,并进行参数分析。研究结果表明:提出的分析方法与工程实际符合性较好;边坡在倾角较陡、坡角较大时稳定性最差,坡角对边坡稳定性影响大于岩层倾角的影响;岩层厚度及层面内摩擦角增加有利于边坡稳定性,且会扩大坡脚剪切区范围。研究成果对反倾岩质边坡破坏的防治具有实践指导意义。     

华北中部平原地表水入渗试验 ——以南宫溹泸河为例

华北平原中部地区含水砂层颗粒细且薄,对地下水储蓄和地表水入渗不利。选择河道带进行地表水入渗试验,以获取最大地下储蓄空间,为该区水资源合理利用提供良策。试验区选在南宫溹泸河,人工引水1.5个月,获取大量监测数据,据此对地下水位和水量的变化特征、入渗量和地下水库调蓄能力进行研究,结果表明：干涸河道引水入渗,入渗比例可达80.54%;溹泸河上下游2个断面Ⅰ-Ⅰ′和Ⅱ-Ⅱ′河道垂向渗透速度为10.81 m/d和10.72 m/d;水平扩散速度为1.69 m/h和2.38 m/h。由于Ⅰ-Ⅰ′断面垂向渗透速度大于Ⅱ-Ⅱ′断面,而水平扩散速度小于Ⅱ-Ⅱ′断面,所以Ⅰ-Ⅰ′断面形成的水丘相比Ⅱ-Ⅱ′断面较为明显,且不易消散。计算结果显示,试验区调蓄库容为1.87亿m3。     

An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

Electrochemical investigation of the iron-containing and no iron-containing AB5-type negative electrodes

The electrochemical behaviour of LaNi_3.55Mn_0.4Al_0.3Co_0.75−xFe_x (x = 0, 0.15, 0.55, 0.75) intermetallic compounds has been studied and presented [C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, Int. J. Hydrogen Energy 29 (2004) 307–311; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 360 (2003) 266–271; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 384 (2004) 249–253]. It has been deduced that the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound has interesting electrochemical properties. In this paper we present the electrochemical study of LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound properties compared with the parent LaNi_3.55Mn_0.4Al_0.3Co_0.75 compound. Several techniques, such as, the chronopotentiometry, the constant potential discharge (CPD), the cyclic voltammetry (CV) and the linear polarization (LP) were applied to characterize these electrochemical properties. The electrochemical discharge capacity of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 alloy increases to reach 294 mAh g⁻¹ after few cycles only (five cycles). However, the activation of the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloy takes more than 20 cycles to be achieved and the obtained maximum discharge capacity is 194 mAh g⁻¹. The hydrogen diffusion coefficient D_H was determined by constant potential discharge and cyclic voltammetry techniques. The obtained values of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compounds are 6.29 × 10⁻¹¹ and 7.62 × 10⁻¹¹, and 2 × 10⁻⁸ and 7.5 × 10⁻⁸ cm² s⁻¹ by CPD and CV techniques, respectively. The exchange current density values, determined by a linear polarization technique, are 44 and 27 mA g⁻¹, respectively, for LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloys.     

基于动态模式分解的移动用户信道容量预测算法

在多输入多输出环境下,为了能够连续预测出移动用户的信道容量并以此合理地分配用户资源,提出了一种基于动态模式分解（DMD）的信道容量预测方法及其优化方法：基于经验模态分解的选择性归一化动态模式分解（ESN-DMD）.仿真结果表明,DMD算法只适用于预测低移速低复杂度的用户信号,ESN-DMD算法可以预测不同移速的用户信道容量.